廈門圣企機電設備有限公司

代工:15159233533（微信）

固話:0592-6081295

QQ:2587258111

美國GE模塊IC756CDV010J-97
美國GE模塊IC756CDV010J-97
綠色電源模塊

高速發展的計算機技術帶領人類進入了信息社會，同時也促進了電源模塊技術的迅速發展。八十年代，計算機全面采用了開關
電源，率先完成計算機電源換代。接著開關電源技術相繼進入了電子、電氣設備領域。

計算機技術的發展，提出綠色電腦和綠色電源模塊。綠色電腦泛指對環境無害的個人電腦和相關產品，綠色電源系指與綠色電
腦相關的高效省電電源，根據美國環境保護署l992年6月17日“能源之星"計劃規定，桌上型個人電腦或相關的外圍設備，在
睡眠狀態下的耗電量若小于30瓦，就符合綠色電腦的要求，提高電源效率是降低電源消耗的根本途徑。就目 前效率為75%的
200瓦開關電源而言，電源自身要消耗50瓦的能源。

開關電源模塊

通信業的迅速發展極大地推動了通信電源的發展。高頻小型化的開關電源及其技術已成為現代通信供電系統的主流。在通信領
域中，通常將整流器稱為一次電源，而將直流-直流(DC-DC)變換器稱為二次電源。一次電源的作用是將單相或三相交流電網
變換成標稱值為48V的直流電源。當前在程控交換機用的一次電源中，傳統的相控式穩壓電源己被高頻開關電源取代，高頻開
關電源(也稱為開關型整流器SMR)通過MOSFET或IGBT的高頻工作，開關頻率一般控制在50-100kHz范圍內，實現高效率和小型
化。近幾年，開關整流器的功率容量不斷擴大，單機容量己從48V/12.5A、48V/20A擴大到48V/200A、48V/400A。

因通信設備中所用集成電路的種類繁多，其電源電壓也各不相同，在通信供電系統中采用高功率密度的高頻DC-DC隔離電源模
塊，從中間母線電壓(一般為48V直流)變換成所需的各種直流電壓，這樣可大大減小損耗、方便維護，且安裝、增加非常方便

一般都可直接裝在標準控制板上，對二次電源的要求是高功率密度。因通信容量的不斷增加，通信電源容量也將不斷增加。

IC695CRU320 1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU.  External high capacity battery IC693ACC302 required.  The CRU320 supports both Genius LAN and Ethernet LAN.  Dual Genius LAN is supported by an applicati

IC695CRU320CA Conformal coated.  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base) redundant CPU.  External high capacity battery IC693ACC302 required.  The CRU320 will only work with RX3i ENIU remote I/O and Genius LAN.

IC695CRU320QP QuadPAC redundant controller.  1Ghz CPU with 64Meg of memory 2 SERIAL PORTS (occupies two slots on system base).  External high capacity battery IC693ACC302 required.

IC695DEM004 Beta i Series 1-Axis Motion Demo Case for use with PACMotion or DSM324i motion controllers

IC695DEM006 PMM Demo Case: RX3i and PACMotion

IC695DEM008 Fieldbus Demo Case: RX3i and Fieldbus

IC695ETM001 Ethernet module 10/100 Mbits 2 RJ45 connections one IP address occupies one slot on system base

IC695ETM001CA RX3i Ethernet Mdl,10/100Mbits,Conformal Coated.

IC695FTB001 FIBER OPTIC TERMINAL BOARD FOR PMM335

IC695FTB1B032 Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density box style screw terminal blocks

IC695FTB1B132 Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud box style screw terminal blocks

IC695FTB1S032 Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density spring style terminal blocks

IC695FTB1S132 Fiber terminal Block kit includes the IC695FTB001 base plus two IC694TBS032 high density extended shroud spring style terminal blocks

IC695HSC304 RX3i High Speed Counter, 4 channels.  8 configurable inputs and 7 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.

IC695HSC308 RX3i High Speed Counter, 8 channels.  16 configurable inputs and 14 configurable ESCP outputs.  Module supports high speed counting, input interrupts and programmable limit switch.  Module requires PCI bus.  Requires terminal block IC694TBxx32.

IC695LRE001 RX3i Local Expansion Module Occupies no system slots on base

IC695LRE001CA RX3i Local Serial Expansion Conformal Coated.

IC695MDL664 Smart Digital 24VDC Input module, 16 input channels in two groups of eight.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL664CA Conformal Coated.  Smart Digital 24VDC Input module, 16 input channels in two groups of eight.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL765 Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points.  Module does not ship with terminal block.  IC694TBB032 or IC694TBSx032 terminal block is required.

IC695MDL765CA Conformal Coated.  Smart Digital Output Module 24/125 volt DC, ESCP 1A Positive Logic 16 Points.  Module does not ship with terminal block. IC694TBB032 or IC694TBSx032 terminal block is required.

IC695NIU001 RX3i NIU with two serial ports and 20K of local logic.  Module requires Universal base (IC695CHSxxx) and requires Ethernet module (IC695ETM001).NIU supports all RX3i I/O modules.

IC695NKT001 RX3i Ethernet NIU Kit includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.

IC695NKT001CA RX3i Ethernet NIU Kit Conformal Coated includes NIU (IC695NIU001) and Ethernet module (IC695ETM001).  ENIU supports two serial ports and 20k of local logic.  TheENIU must be installed in a IC695CHSxxx base.

IC695NKT002 RX3i Ethernet NIU Kit with two Ethernet modules.

IC695NKT002CA RX3i one NIU001 and two ETM001 Conformal

IC695PBM300 RX3i PROFIBUS Master Module (must be installed on RX3i PCI bus).  The mo dule supports PROFIBUS V1 Master functionality.

IC695PBM300CA RX3i PROFIBUS Master, Conformal Coated, Module (must be installed on RX3i PCI bus).  The module supports PROFIBUS V1 Master functionality.

IC695PBS301 RX3i Profibus Slave module supports V1 functionality.

IC695PMM335 PACMotion 4-axis servo motion controller for RX3i

IC695PNC001 Profinet Controller.  The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps.  Compatible with IC695CPU315, CPU320, CPE310 and CPE305 only a

IC695PNC001CA Conformal Coated.  Profinet Controller.  The PNC module provides all the functions, services, and protocols required for certification as a PROFINET IO Version 2.2 device, running at both 100Mbps and 1Gbps. Compatible with IC695CPU315, CPU320, CPE310

IC695PNS001 RX3i Profinet Scanner Module

IC695PRS015 Pressure Transducer module.  The serial port communicates with up to 15 Honeywell LG1237 Smart Pressure Transducer sensors.  Requires firmware/software 6.5 or higher.

IC695PSA040 RX3I Power supply 120/240VAC and 125VDC 40 watts occupies two slots on s ystem base.

IC695PSA040CA RX3i AC Power Supply, 40 Watt Conformal Coated